domenica 25 febbraio 2018

GLI ASPIRASALIVA MONOUSO UTILIZZATI DALL’AGENZIA DELLE ENTRATE COME PARAMETRO DI GUADAGNO DEL DENTISTA

Nell’impiego della cannula aspirasaliva monouso si corrono due rischi operativi a cose normali.

1-rischio di contenzioso là dove si verifica un’accidentale aspirazione dei tessuti molli del paziente o là dove la fuoriuscita del filo in metallo ferisce il paziente o l’assistente;
2-rischio di contaminazione del campo operatorio. La cannula aspirasaliva è infatti venduta NON sterile e confezionata in comunissimi sacchetti di plastica spesso forati per evitare la formazione interna di condensa. La cannula non è sterilizzabile in autoclave.

Ma se questo rischio non bastava adesso si aggiunge un rischio “Multa” non da poco.

In un interessante articolo di Norberto Maccagno su Odontoiatria33Il bullone e l'aspirasaliva, la fattura che descrive più o meno, il dove si trova il credito ed il sito rinnovato” si disquisisce sulla pratica discutibile che l’Agenzia delle Entrate utilizza per contestare il reddito dichiarato dai dentisti.

Pratica ribadita in cassazione in favore della commissione tributaria ("costituendo dato assolutamente normale e corrispondente ai canoni di ragionevole probabilità quello secondo cui, per ciascuna prestazione odontoiatrica, si adoperi tendenzialmente una certa quantità di materiale di consumo, onde tale elemento rappresenta un fatto noto capace, anche di per sé solo, di lasciare ragionevolmente e verosimilmente presumere il numero delle prestazioni effettuate ed i relativi ricavi").

 

Tutti ben sappiamo però che 1 aspirasaliva non corrisponde a 1 cura erogata e quindi pagata al dentista.

1 aspirasaliva monouso può significare che un paziente si rechi in studio 1, 2, 5 o forse 10 volte per terminare una terapia o un intervento di protesi e quindi pagherà per un solo intervento a fronte di magari 10 aspirasaliva monouso impiegate su di esso.

Questo significa che il dentista riceverà 1 solo pagamento a fronte di una prestazione e non 10 pagamenti.

 

Non è corretta neppure la detrazione del 10% di monouso potenzialmente sprecato che l’Agenzia delle Entrate applica al conteggio per stabilire il fatturato presunto del dentista.


A questo punto il consiglio è quello di impiegare il più possibile strumenti e materiali riutilizzabili cioè ricondizionabili.

Esistono aspiraliva riutilizzabili simili alle cannule monouso ma forse quello che sta trovando sempre più impiego è l’aspirasaliva “Isolite System” che fra l’altro offre molti vantaggio rispetto all’aspirasaliva monouso.


Vediamolo in sintesi:

L’Isolite System è migliore della cannula aspirasaliva monouso sia per il dentista sia per il paziente.

-Funziona quasi come una diga.
-Rende libere entrambe le mani.
-Elimina il rischio contenzioso legale che porta con se la cannula monouso.
-Migliore anche da un punto di vista dei risultati.
-Più comfort per il paziente, più comfort per il dentista, campo operatorio asciutto, mani libere, risultati sicuramente migliori.
-È insieme divaricatore abbassalingua ed aspiratore, mantiene isolati contemporaneamente due quadranti, permette un più facile accesso anche ai denti posteriori.
-È fornito di illuminazione a led che permette un ottima visibilità, illuminazione che si può spegnere o ridurre anche del 90% quando si impiegano i compositi.


Anche il paziente usufruisce di una serie di vantaggi:

-Quando utilizzato al posto della diga elimina il senso di soffocamento provocato dal foglio in lattice (o altro materiale impiegato) sulla faccia del paziente.

-Il divaricatore morbido permette di non forzare l'apertura della mandibola, il paziente può anche chiudere leggermente la bocca, il materiale è morbido, rilassandosi leggermente.

Ovviamente può essere impiegato su tutti i pazienti bambini compresi.


In conclusione considerando i vantaggi operativi, i rischi per il paziente e i rischi legali e fiscali per il dentista è arrivato il tempo che la cannula aspirasaliva monouso lasci il posto a sistemi tecnologicamente più avanzati e più sicuri.




mercoledì 21 febbraio 2018

DDC LA NOSTRA ESPERIENZA AL VOSTRO SERVIZIO


Da diciotto anni DDC Consulting lavora in Italia e all’estero proponendo servizi di consulenza in diversi settori.

-Persona Responsabile del Rispetto della Normativa, figura obbligatoria per tutti i fabbricanti, mandatari, e in casi specifici per distributori e importatori, introdotta dal nuovo regolamento dispositivi medici;
-Temporary Managing;
-Consulenza legale, CTP e CTU;
-Auditor per Organismi Notificati;
-Marchi e brevetti;
-Sistemi di Gestione per la Qualità, implementazione e mantenimento;
-Marcatura CE Dispositivi Medici, realizzazione documentazione tecnica e assistenza;
-Audit interni;
-Audit presso fornitori;
-Formazione: Qualità, Dispositivi Medici, Prodotti Specifici;
-Documentazione tecnico pubblicitaria, realizzazione e modifica;
-Progettazione nuovi prodotti, modifica prodotti esistenti;
-Processi di produzione, implementazione e modifica;
-Marketing.

Nel frattempo abbiamo sviluppato anche il settore sportivo con le misurazioni posturali, collaborando con l’Università Bicocca di Milano e l’università di Verona e con i Camp sportivi della Gazzetta dello Sport. 


Per maggiori informazioni:
Tel.: +39 337 539659
Mail: ddcconsulting@outlook.it

BIOKET Srl PRESENTA IL SUO SISTEMA PER LA FISIOLOGICA REGISTRAZIONE DELLA RELAZIONE CRANIOMANDIBOLARE MEDIANTE SQUADRATURA GNATOLOGICA BASALE

Informativa BIOKET

Il fabbricante italiano di dispositivi medici BIOKET Srl dopo anni di studi, ricerche, approfondimenti e verifiche cliniche (su oltre 800 pazienti) e kinesiografiche dà alla luce un sistema di registrazione (in corso di brevettazione) della fisiologica relazione cranio-mandibolare mediante squadratura gnatologica basale (SGB) dei modelli in gesso delle arcate dentarie.

BIOKET Srl sottolinea l’importanza, ai fini della diagnosi e prognosi ma soprattutto della terapia, di individuare il fisiologico rapporto cranio-mandibolare ma la soddisfazione più grande è stata da una parte la risposta più che positiva dei pazienti ai test clinici effettuati e dall’altra il riscontro avuto nelle applicazioni terapeutiche.

La presentazione ufficiale della metodica “LA FISIOLOGICA REGISTRAZIONE DELLA RELAZIONE CRANIOMANDIBOLARE MEDIANTE SQUADRATURA GNATOLOGICA BASALE” avverrà il 2 e 3 marzo a Valencia (Spagna), insieme ai dottori Antonio Rey e Rodrigo Santamarta, presso la sede della Clinica Dentale Santamarta sita in Carrer de Guillem de Castro, 96.

Relatori Massimo Palanca e Giorgio Gobbi che sono gli ideatori della metodica.

Questo il programma:
VENERDÌ 2 MARZO
-Ore 09:00
INTRODUZIONE
La Squadratura Gnatologica Basale (SGB): principi ispiratori
-09:30
LO SVILUPPO DEI MASCELLARI
La crescita differenziata dei mascellari: fattori ormonali, attivi e passivi
Osso basale e osso periferico: simmetrie e asimmetrie
Studio su Dental Scan
-Ore 11:15
Coffee break
-Ore 11:30
IL MASCELLARE SUPERIORE
La scelta dei punti dell’osso basale
L’individuazione dei: - piano orizzontale - asse mediano osseo (piano sagittale) - asse trasverso osseo (piano frontale)
-Ore 12:00
LA MANDIBOLA
La scelta dei punti dell’osso basale
L’individuazione dei: - piano orizzontale - asse mediano osseo (piano sagittale) - asse trasverso osseo (piano frontale)
-Ore 12:30
LA SQUADRATURA GNATOLOGICA BASALE (SGB)
Gli obiettivi della squadratura: l’allineamento dei piani dei mascellari
Le fasi operative
Le attrezzature dedicate
Il rilevamento dell’impronta
-Ore 13:00
Pausa pranzo
-Ore 14:30
LE FASI OPERATIVE DELLA SGB
Individuazione dei punti dell’osso basale
Individuazione degli assi mediani e degli assi trasversi ossei
Parallelizzazione dei punti ossei
Posizionamento dei modelli nello zoccolatore per la realizzazione della base maggiore
Realizzazione della base minore
Posizionamento dei modelli sullo Gnatofix 3d
-Ore 16:30
Coffee break Ore
-17:00
LA REGISTRAZIONE DELLA FISIOLOGICA RELAZIONE CRANIO-MANDIBOLARE
Verifica dell’allineamento degli assi mediani dei modelli
Verifica dell’allineamento degli assi trasversi dei modelli
Determinazione della verticalità tra i modelli
Registrazione del rapporto mandibolo-cranico con apposito materiale
Confronto fra il rapporto mandibolo-cranico in abituale e quello ottenuto dopo la squadratura basale dei modelli
Posizionamento in bocca della nuova registrazione per la sua valutazione clinica e funzionale.

SABATO 3 MARZO
-Ore 09:00
LA VALUTAZIONE CLINICA E STRUMENTALE DELLA SGB: 1° PAZIENTE
Il controllo clinico
Il controllo strumentale
La funzionalizzazione
-Ore 10:45
Coffee break
-Ore 11:00
LA VALUTAZIONE CLINICA E STRUMENTALE DELLA SGB: 2° PAZIENTE
Il controllo clinico
Il controllo strumentale
La funzionalizzazione
-Ore 13:00
Pausa pranzo
-Ore 14:30
LA CALOTTA
Le curve di Spee, di Wilson e la sfera di Monson
La calotta: concavità e dimensioni (4” e 8”)
La sezione aurea e la posizione dei denti
-Ore 15:00
UTILIZZI TERAPEUTICI DELLA SGB: CASI CLINICI
Sindromi algico-disfunzionali delle ATM
Ortodonzia intercettiva e fissa
Protesi fissa e implanto-protesi
Protesi mobile totale
-Ore 17:00
Fine lavori

Per informazioni 
Tel.: +39 0735 680243
Mail: bioketsrl@gmail.com 

lunedì 19 febbraio 2018

A SIMPLE PROCESS FOR THE ENHANCED VISUALIZATION OF ORAL MUCOSAL ABNORMALITIES - Amazing Healthcare Technology

From

web site

VELscope - Original publisher

Traditional oral mucosal examination tools rely on reflected light to visualize the oral cavity. VELscope® Vx uses tissue fluorescence rather than reflectance.
The basic premise of tissue fluorescence visualization is that it may enable clinicians to see the effects of cellular, structural, and/or metabolic activity changes in oral mucosal tissues by observing the fluorescence response of oral tissues in response to light excitation.
Natural tissue fluorescence is caused by "fluorophores". When fluorophores are excited by light of an appropriate wavelength (for example, blue), they emit their own light at a longer wavelength (for example, green).

Abnormal fluorescence patterns aid the clinician in visualizing unhealthy mucosal tissue that sometimes cannot be seen with the naked eye, including any tissue undergoing a change (which can occur in the oral mucosa for a multitude of reasons) such as premalignant dysplasia or oral cancer.

How Does It Work?

The VELscope ®Vx Handpiece emits a safe, visible blue light into the oral cavity, which excites the oral tissue and causes it to fluoresce. The oral cavity can then be examined in real time, enhancing the practitioner’s ability to visualize suspicious tissue that may require further investigation.




Abnormal fluorescence patterns aid the clinician in seeing unhealthy mucosal tissue that sometimes cannot be visualized with the naked eye. Such patterns may arise from a variety of causes, including:
·         An increase in metabolic activity in the epithelium
·         A breakdown of the fluorescent collagen cross-links in the connective tissue layer beneath the basement membrane
·         An increase in tissue blood content, either from inflammation or angiogenesis (hemoglobin strongly absorbs fluorescence excitation [blue] and emission light [green])
·         The presence of pigments (e.g., melanin or amalgam particles) which absorb light
The VELscope® Vx was designed to enhance the visualization of oral mucosal abnormalities that may not be apparent or visible to the naked eye. VELscope ®Vx is further intended to be used by a surgeon to help determine the appropriate margins for surgical excision

Principles of Operation
The VELscope® Vx handpiece works in three ways to help the clinician identify oral mucosal abnormalities.
1-Induces natural tissue fluorescence by illuminating the oral cavity with a bright blue light.
2-Filters out reflected light, allowing the clinician to visualize the tissue fluorescence.
3-Applies proprietary optical filtering technology to enhance fluorescence visualization.

Other Applications

Medical

A number of promising opportunities have been idenfified to leverage the proprietary, patented fluorescence tissue visualization technology platform into visualization applications outside of the oral cavity and into other areas of medicine. The company actively engages in research partnerships that explore the potential of its fluorescence visualization technology.

Expanding LED Medical Diagnostics Inc.'s proprietary visualization technology into other areas of medicine could provide gynecologists, gastroenterologists, ear nose and throat specialists, dermatologists and family practitioners with cost-effective tools to aid in the visualization and/or delineation of tissue and mucosal abnormalities, including precancer and cancer.

Watch VELscope® 

sabato 10 febbraio 2018

RAPEX - THE RAPID ALERT SYSTEM FOR NON-FOOD DANGEROUS PRODUCT - SISTEMA EUROPEO DI ALLERTA RAPIDA PER I PRODOTTI DI CONSUMO PERICOLOSI

Updated to / Aggiornamento al 
09.02.2018
Weekly overview report of RAPEX notifications

EN
RAPEX is established as the EU rapid alert system that facilitates the rapid exchange of information between Member States and the Commission on measures taken to prevent or restrict the marketing or use of products posing a serious risk to the health and safety of consumers with the exception of food, pharmaceutical and medical devices, which are covered by other mechanisms.
As of 2010, the system also facilitates the rapid exchange of information on products subject to EU harmonisation regulation and posing a serious risk to the health and safety of professional users as well as on those posing a serious risk to other public interests protected via the relevant EU legislation (e.g. environment and security). Both measures ordered by national authorities and measures taken 'voluntarily' by producers and distributors are reported by RAPEX.
Every Friday, the Commission publishes a weekly overview of the products posing a serious risk as reported by the national authorities (the RAPEX notifications). This weekly overview gives information on the product, the identified risk and the measures that were taken in the notifying country. The Commission also publishes the list of other countries where the notified product was found on their market and measures were taken. Since 2013, the Commission also publishes notifications on products posing less than serious risk as well as notifications on professional products and on those posing a risk to other public interests protected via the relevant EU legislation (e.g. environment and security).

ITA
Il Rapex (European Rapid Alert System for non-food consumer products) è un sistema europeo di allerta rapida per i prodotti di consumo pericolosi.
Grazie a questo sistema le autorità nazionali notificano alla Commissione europea i prodotti che, ad eccezione degli alimenti, dei farmaci e dei presidi medici, rappresentano un grave rischio per la salute e la sicurezza dei consumatori. 
Quando si accerta la pericolosità di un prodotto (ad esempio, un giocattolo, un articolo di puericultura o un elettrodomestico), l'autorità nazionale competente prende gli opportuni provvedimenti per eliminare il rischio.
Può ritirare il prodotto dal mercato, richiamarlo se è già arrivato ai consumatori o lanciare un avvertimento. 
Il punto di contatto nazionale segnala quindi il prodotto alla Commissione europea (direzione generale Salute e tutela dei consumatori) informandola dei rischi che presenta e dei provvedimenti adottati dall'autorità dello Stato membro in cui si è verificato l'evento per prevenire rischi e incidenti.
La Commissione europea diffonde le informazioni ricevute ai punti di contatto nazionali degli altri Stati membri e pubblica su Internet riepiloghi settimanali dei prodotti segnalati pericolosi e dei provvedimenti adottati per eliminare i rischi. 
I punti di contatto nazionali si assicurano in tutti gli Stati membri che le autorità competenti controllino se il prodotto pericoloso notificato è presente sul territorio nazionale. 
Se così è, le autorità intervengono per eliminare i rischi disponendo che il prodotto sia ritirato dal commercio o richiamato se è già arrivato ai consumatori oppure lanciando avvertimenti.
Fin dall’entrata in vigore della Direttiva sulla sicurezza generale dei prodotti 2001/95/CE, in data 15 gennaio 2004, la Commissione europea pubblica, con cadenza settimanale, un elenco delle notifiche Rapex accessibile al consumatore.

martedì 6 febbraio 2018

DENTAL INSTRUMENTS: NEWS

1. Foreword
In recent years, in dental hand instruments field we have observed a lack of novelty useful for the dentist and his team. Some geometrical change of the working tips, variants to the geometries of the handles, use of different material of construction, some variations in the form and retention of the handles but nothing more.

2. Simplicity and effectiveness
Crisis, decline in marked demand, manufacturing costs: many factors have contributed not to push big news.

An Italian company presented a hadle that brakes the mold of existing ones. With an eye to the safety of the dentist, assistant and hygenist, has realized a handle longer than the existing ones on the market today.

Tradizionally the handles of the instruments that put at risk the operator cuts and punctures like scalers, curettes, probes are 100-105 mm length. In rare case 110 mm length. This new handle is about 115 mm length considering the external steel parts, on which the ends are fixed.

3. Characteristics
The design is not limited to a longer handle: the handle is made of a plastic material which doesn’t contain toxic component recently banned such as the parabens, but doesn’t contain even PVC, phtalates and many other toxic components.

Not only that, the tips are inserted in steel inserts which are co-moulded in the plastic material but without being totally drowned. Part of them emerge sas to allow a perfect cleaning and sterilization of the instrument.


Diagram summarizes the characteristics:


The criterion of assembly of the tips is innovative, too. The handle contains no metal ensuring the typical lightness and manageability of plastic instruments. The socket is favored by a diameter of 10.5 mm.

These three huge advantages have been obtained simply by lenghtening the handle and reviewing the criteria for entering tips as a simple operation but up to now no one had ever put into practice.

Even those who use sterilization boxes can use the longer instruments with no problem by putting them in the longer side or, just at the time of repurchase, buying boxes suitable for such use, for example the ones that Hu-Friedy manufactures since a lot.

4.Where to find them?
In Italy there are two companies that joined this project: QUASAR DENTAL EQUPMENT www.quasardental.com from Legnano (MI) already known for the best quality of rubber polishers and for its silicon universal base called Nest and Den-Tag www.dentag.com from Maniago (PN) already known for its very good quality and range of dental instruments.

There instruments can be purchased from dental deposits or you can simply contact the above mentioned manufacturers to learn about the place of purchase and prices.

5.Conclusions
Instruments with split ends may injure the operator’s hand or brake the glove (with the opposite tips of the working one). The possibility of injury is during use, handling or passing the instrument between Assistant-Dentist-Assistant.

As an additional preventive action Today the dentist can choose an instrument with a longer handle instead of a “traditional lenght” one.

Related articles> Click here


lunedì 5 febbraio 2018

"NEST" - DENTAL UNIVERSAL BASE IN SILICON FOR BURS, MOUTH MIRRORS, CROWN REMOVER TIPS, PERIOTOME TIPS, SINDESMOTOME TIPS, TIPS FOR ULTRASONIC DEVICE AND MORE

Luca Martinelli

Dental universal base in silicon

Publication 27th April 2015
Updating Gen. 2018


1 DENTAL UNIVERSAL BASE IN SILICON

1.1 Foreword
The universal base comes from the dental bur holder. It was born to satisfy fexibility and practicality needs. It is an instrument that permits to manage indifferently burs with any kind of axle diameter (H, HP, HS, CA, FG, FGXL, RA), syndesmothome tips, crown remover tips, mouth mirrors, periotome tips and so on. An instrument as much trivial as helpful and practical to manage, in order and ready to use all the myriad of little instruments and accessories that, in dentistry, can often be lost into the drawer.

Finally, a unique instrument that permits to have available on the worktop all the necessary tips neatly, which grants even to improve the performance in terms of time and security.


Te universal base in silicon, for its characteristics, is nowadays the best device, compared to the simple bur holder in metal, for example, for the use in dentistry.

1.2 The bur holder
Let’s take for example the bur holder. It’s a service instrument that must permit to find immediately the necessary burs and keep it easily.

It must also minimize all the possible problems that can be generated during the sterilization and storage phases.

The most used bur holders which can be found on the market are made in aluminium. After those there are the one made in steel and recently there are also bur holders made in plastic and silicon.

Bur holders in aluminium:they can keep only one or two kind of burs

2. WHICH BUR HOLDER SHALL I CHOOSE?
After having read our explanation, it would be easily clear that the silicon bur holders would be the best one to be chosen, mostly the 35 holes universal ones (which means that they can keep different diameters axel burs).

Silicon bur holders

First of all, silicon bur holders are holders that don’t cause galvanic effect, which is the
ionic transfer effect of metals, caused by the difference of metals with which the burs are
built, and the relative aluminum or steel bur holders. Silicon bur holders save burs – and
themselves, too – by oxidation and corrosive effects.

Compared with the plastic bur holders, the food silicon ones have the characteristic not to
be toxic.
By an operational point of view, which is the most interesting, we can say that silicon bur
holders are useful for three reasons at least:

1- Possibility to insert both turbines’ and micromotors’ burs, permitting to prepare aunique bur holder which contains all the necessary burs.

Universal base

 2- Possibility to prearrange operative sets by color distinguished (on the market youcan find bur holders with not less than 8 different colors), permitting to organize atmost warehousing and timing of intervention and choice;



3- Prevention by burs accidental falls due to upsetting of the bur holder, which means prevention by possibility of breaking or sterilize one more time burs, thanks to cross holes that you can find on the best silicon bur holders.



To those three main strong points, apart from prevention of the galvanic effect, we can add that the silicon base has got non-slip properties, which can prevent slipping of the holder on
smooth surfaces and can simplify the grasp of the chosen bur with a single hand. 

Usually, those bur holders have the possibility to have a low cover, for surgery burs, or a higher cover, for lab burs.

3 SILICON UNIVERSAL BASE “NEST”
As we know on the market there are different bases for only one kind of bur, bases in which there can be fit syndesmothome tips and so on. Maintaining on service more different bases means, apart from a cost, also the managing of them mostly during re processing phases, which means locate and predispose them for the specific tips that they can keep.



            





  
Univeral base with
periotome tips



Endodontic Burs

The silicon universal base NEST is a unique base that can keep all the tips of instruments of different destination use. This permits to buy a unique disposal and to manage it easily during reprocessing and stocking phase without worry about searching, as for the metal bases, the right base.

Moreover the possibility to choose between different colors permits a more practical managing of the tips and burs that can be divided according to use.

NEST ultrasonic washing burs
Last but not the least NEST permits a great saving of time in collecting and selecting burs in ultrasonic machine and prevents demages of burs and tips caused by ultrasonic waves.

  
                                                        YOU TUBE LINK Video2 >Click Here

4 COSTS
The price difference between silicon universal bases and the metal or plastic bases are none (the silicon ones are even less expensive). The economic factor is an advantage and the operator can buy many universal bases in different colours in which he can insert all that he prefers or even use a unique base for everything.

The weight, too is much lower than the ones in metal or made with some kind of plastics.

This fact, apparently not so interesting, is important when sending high quantities all over. A reason more to prefer silicon universal base to all the other bur holders (also for the onew who have to sell the product!).